Polypropylene (PP), also known as polypropene, is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles (e.g., ropes, thermal underwear and carpets), stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.
A curtain wall system is an outer covering of a building in which the outer walls are non-structural, but merely keep out the weather. As the curtain wall is non-structural it can be made of a lightweight material reducing construction costs. When glass is used as the curtain wall, a great advantage is that natural light can penetrate deeper within the building. The curtain wall façade does not carry any dead load weight from the building other than its own dead load weight. The wall transfers horizontal wind loads that are incident upon it to the main building structure through connections at floors or columns of the building. A curtain wall is designed to resist air and water infiltration, sway induced by wind and seismic forces acting on the building, and its own dead load weight forces.
Duct tape, or duck tape, is cloth- or scrim-backed pressure sensitive tape often sealed with polyethylene. There are a variety of constructions: backings, adhesives, etc. One variation is gaffer tape but differs in that gaffer tape was designed to be cleanly removed, while duct tape was not. It is generally silver or black but also available in other colors. In 1942 Revolite, formerly a division of Johnson & Johnson, originally developed an adhesive tape made from a rubber-based adhesive applied to a durable duck cloth backing. This tape resisted water and was used as sealing tape on ammunition cases during World War II. Because of these properties, it was also used to repair military equipment quickly, including jeeps, firearms, and aircraft.
Duct tape is commonly used in situations that require a strong, flexible, and very sticky tape. Some have a long-lasting adhesive and resistance to weathering.
A more specialized product, commonly known as gaffer tape, is preferred by gaffers in the motion picture and television industries, as it does not leave a sticky residue when removed. It comes in a variety of colours, and is more easily torn into thin strips for precise application. Duct tape, in its guise as "racer's tape", "race tape" or "100 mile an hour tape" has been used in motorsports for more than 40 years to repair fiberglass bodywork (among other uses). Racer's tape comes in a wide range of colors to help match it to common paint colors. In the UK, it is usually referred to as "tank tape" in motorsports use.
GHB 110 and GHB 150 Curtain Wall Tapes are 1.10 mm and 1.50mm thick (respectively) tapes for bonding of Aluminium Composite Panel to various painted and unpainted metal structure. Curtain wall tapes have excellent temperature resistance.
We offer a quality range of filament tapes which are widely used in various applications like glass sealing, closing, strapping, bundling and reinforcing. These are suitable for light duty and as well as heavy-duty packaging and are available in many sizes, colors and grades. Moreover, these mono filament tapes can be customized as per the requirement of our clients.Available in various sizes | Available in various thicknesses | Moisture resistance
These tapes are used in Refrigerators, Fax machines etc for holding ' moveable parts' like plastic trays etc, to make sure that during transit there are no damages to these parts. These tapes do not leave any adhesive glue marks on the surface when removed. These tapes have very high tensile strength and are not very easy to break. These tapes can also be used against steel straps for heavy duty packing and mounting of articles in white good industry.
Filament tape or strapping tape is a pressure sensitive tape used for several packaging functions such as closing corrugated fiberboard boxes, reinforcing packages, bundling items, pallet unitizing, etc. It consists of a pressure sensitive adhesive coated onto a backing material which is usually a polypropylene or polyester film and fiberglass filaments embedded to add high tensile strength. It was invented in 1946 by Cyrus W. Bemmels, a scientist working for Johnson and Johnson.
A variety of grades of filament tape are available. Some have as much as 300 pounds of tensile strength per inch of width. Different types and grades of adhesive are also available.
Most often, the tape is 12 mm (approx. 1/2 inch) to 24 mm (approx. 1 inch) wide, but it is also used in other widths.
A variety of strengths, calipers, and adhesive formulations are available.
The tape is most often used as a closure for corrugated boxes such as a full overlap box, five panel folder, full telescope box. "L" shaped clips or strips are applied over the overlapping flap, extending 50 - 75 mm (2 - 3 inches) onto the box panels.
Heavy loads or weak box construction may also be aided by the application of strips or bands of filament tape to the box.
Floor marking tapes are being widely used now a days for safety, identifying lane marking for storage segmentation, ideal for ISO 9001, QS 9000 companies, good resistance to chemical and other moving objects.
Better than paints | Available in various sizes and colors | Colors available: White, yellow, blue, green, black, red, yellow-black, red-white, green-white and more
Floor marking tapes are PVC film based tape with solvent or acrylic adhesive used for marking of areas. It comes in different colors like yellow, black, red blue green. It is mandatory to use in export houses to identify demarked areas in industries where assembly line or huge labourers and staff is doing their respective works in process . This marked area with floor marking tapes helps workers to put the material at right place . It segregates the finished semi and raw and processed material and avoid to get mixed up. The floor marking tapes are nowadays mandatory to use in export houses under the international certification and allows delegation to visit the sites and projects and see working with the ease. The tape with strong adhesive has shelf life according to the traffic on the floors.
Excellent shock resistance. Heat insulation. Double stick. Ultra flexibility. Wide range of bonding application, Sticky on both sides of tape, suitable for wall-mount pictures, decorations and can be used on most types of walls, ceramic tiles and wood surface that are clean, dry and smooth. Can be stamped to various shapes
Masking tape is a type of pressure sensitive tape made of a thin and easy-to-tear paper, and an easily released pressure sensitive adhesive.
It is available in a variety of widths. It is used mainly in painting, to mask off areas that should not be painted.
The adhesive is the key element to its usefulness, as it allows the tape to be easily removed without leaving residue or damaging the surface to which it is applied.
The tape is available in several strengths, rated on a 1–100 scale based on the strength of the adhesive. Most painting operations will require a tape in the 50 range.
Household masking tape is made of an even weaker paper and lower grade adhesive.
Masking tape was invented in 1925 by 3M employee Richard Drew. Drew observed auto-body workers growing frustrated when they removed butcher paper they had taped to cars they were painting. The strong adhesive on the tape peeled off some of the paint they had just applied. Touching up the damaged areas increased their costs. Drew realized the need for tape with a gentler adhesive.
We supply PP Strapping Rolls which are known for accuracy in terms of length, finishing, toughness and reliability. We have all sizes and thickness available to suit the requirements of the clients. These rolls are available in 9mm to 15mm width and from 0.5 mm to .08 mm thickness. These PP Strapping Rolls can be made available to our clients at their doorsteps.
Cartons | Unitized Packs | Boxes | News Papers, etc.
Strapping, also known as bundling and banding, is the process of applying a strap to an item to combine, hold, reinforce, or fasten it. The strap may also be referred to as strapping. Strapping is most commonly used in the packaging industry.
Electrical tape (or insulating tape) is a type of pressure-sensitive tape used to insulate electrical wires and other material that conduct electricity. It can be made of many plastics, but vinyl is most popular, as it stretches well and gives an effective and long lasting insulation. Electrical tape for class H insulation is made of fiberglass cloth.
A selection of color-coded electrical tapes.
A wide variety of electrical tapes is available; some for highly specialized purposes. Electricians generally use only black tape for insulation purposes. The other colours are used to indicate the voltage level and phase of the wire. (In fact, the coloured tape is referred to as "phasing tape".) This is done on large wire which is available only in black insulation. When wires are phased, a ring of tape is placed on each end near the termination so that the purpose of the wire is obvious. The following table describes this usage.
Tape colour Usage (US) Usage (UK – old) Usage (International – new)
Low voltage, phase A Insulation
Low voltage, neutral Low voltage, phase B
Red Low voltage, phase B Low voltage, phase A Sheath, 415 V 3 phase
Blue Low voltage, phase C Low voltage, phase C Low voltage, neutral
Sheath, 230 V
Brown High voltage, phase A Low voltage, phase A
Orange High voltage, phase B Sheath, garden tools
Yellow High voltage, phase C Low voltage, phase B Sheath, 110 V site wiring
Green Earth ground Earth
Green with yellow stripe Isolated ground Earth
Grey Low voltage, neutral
High voltage, neutral Low voltage, phase C
White Low voltage, neutral
High voltage, neutral
Tape that is approved for electrical applications will carry an approval label from an agency such as Underwriters Laboratories.
Laminating with fiber glass, specially for reinforced purpose. Very high tensile strength. High adhesion. Good packaging results While maintaining same quality as those of conventional Kraft paper tape. This tape with fiberglass backing is designed for heavy packaging in economical way High resistance to abrasion while transporting. For export packing as well. Brown Color & Environment friendly. Tamper proof Printed version also available
A general purpose stretch film is used for packing of paper rolls, machine, wood, plastic, for industrial purposes, home and office use. Generally it is used in packaging industry to hold boxes on a pallet during transportation and safeguard articles against any damages. A stretch film exhibits high elongation, high cohesion and high holding power. Types of stretch film available.
Stretch wrap or stretch film is a highly stretchable plastic film that is wrapped around items. The elastic recovery keeps the items tightly bound. In contrast, shrink wrap is applied loosely around an item and shrinks tightly with heat.
It is frequently used to unitize pallet loads but also may be used for bundling smaller items.
Types of stretch film include bundling stretch film, hand stretch film, extended core stretch film, machine stretch film and static dissipative film.
GHB 200 Structural Glazing Tapes is a 2.03 mm thick pressure sensitive double side acrylic adhesive tape for bonding glass to painted and unpainted metal which is used for construction of Structural Glazing Tapes is appropriate for applications which demand a thicker conformable product.
Color available: Grey
Excellent quick double-stick. Strong adhesion, tear by hand.
A perfect substitute to replace glue for bonding purpose Non-deteriorating.
Applicable for decoration, postal service and laminating
Ideal for holding and joining of light weight items in office and house application
Various sizes and grades available
Double-sided tape is any pressure sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater looking projects and better craftsmanship. Double sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect.
Double-sided tape is created by applying a thin adhesive layer to each side of a carrier material. For example, double-sided tissue tape, an easy-to-rip double-sided tape, is created by applying adhesive to two sides of tissue paper, which is then wound with a siliconed paper to avoid it sticking to itself. Most adhesive tapes are manufactured in log form, such as a large 1 to 3 meter wide roll, and then an adhesive tape converter is used to slit the rolls into the required widths.
All Rights Reserved by Bindal Group of Companies 2010-2014 | Powered by Infiqu Technologies Pvt. Ltd.